Lift table for timber applications – BFX

BFX series tables are specially designed for the timber processing industry. They are designed for transferring timber in the lowered position.

Lift table - BFX series

fitted with a floating conveyor, they feature a roller-locking device that engages as soon as the load is lifted,
joints, bearings and rollers fitted with maintenance-free self-lubricating bushes.
electro-hydraulic power unit with IP 54 motor.
external electrical cabinet for a 230/400 volt three-phase 50 Hz power supply, connected to the lift table by 3 m of cable.

In particular, it includes:

An externally operated, padlockable circuit-breaker isolator.
A motor contactor.
Protective fuses.
A transformer for the 24 volt supply.
Up/down control by hold-to-run push buttons and a mushroom-head emergency stop, connected to the electrical cabinet by a 3 m cable.
Cabinet/table/push-button box connecting cable, type FR-N05-VV5F.
Finishing paint: Grey 7043.

through design and standard equipment

Dual hydraulic safety system, with a pipe-rupture valve built into each hydraulic cylinder and an electrically pilot-operated check valve at the base of the cylinders: the platform is held and locked in position in the absence of electrical power and in the event of an accidental pipe rupture.
Factory-set pressure relief valve to prevent the lifting of a load exceeding the rated capacity of the lift table.
Fixed upper limit switch; it automatically stops the platform rising at maximum travel.
Safety frame beneath the perimeter of the platform, in case an obstacle is encountered.
Up/down control with mushroom-head emergency stop, supplied at 24 volts.

Fold-down maintenance prop, allowing the table to be held mechanically at a fixed height for maintenance. It is sized to support the rated load.

Systematic inspection and testing of every lift table before dispatch.
The design and construction of these standard lift tables comply with the French regulations derived from the European Machinery Directive 2006/42/EC. European standard for lift tables: EN 1570.
All these models are supplied with CE marking.